Raspberry Pi 0.96"; OLED Display Module is made of 128x64 yellow and blue OLED pixels, the diagonal is only 0.96 inches. The controller is SSD1306 and communicates via 4-wire SPI, the display has its own backlight, and no backlight LED is required, This reduces the power required to run the OLED and is why the display has such high contrast, extremely wide viewing angle, and a high operating temperature.

Highlighted Features

• Ultra-low power supply

• Maximum current 100uA

• Keep up current 12.25uA

• Hardware keeps up display

• 3.3V work voltage ,([MIN 1.6V] ,[MAX:3.6V])

• Internal DC/DC voltage converter

• SPI driver support , AT 64MHz[TYP] 125MHZ[OB]

• FP frequency: 64fps[TYP] 368fps[OB]

• Compatible with Raspberry Pi A+, B, B+/2.

Specifications

• Outline Drawing: 370x300(mm)

• Number of pixels: 128x64

• Panel size:26.70x19.26x1.45(mm)

• Active area: 21.74x10.864(mm)

• Pixel pitch 0.17x0.17(mm)

• Pixel size: 0.154x0.154(mm)

Hardware Overview

 Figure 1: Device Schematics

Figure 2: Product Overview