Arduino Nano 33 BLE Sense Rev2

Arduino Nano 33 BLE Sense Rev2

R 1,434.05
SKU:
102991759

ACCESSORIES ARE SOLD SEPARATELY.
NOT SURE WHAT TO ORDER? CONTACT US TODAY!

Vendor:

Arduino Nano 33 BLE Sense Rev2 is an AI-enabled, finger-size development board, built upon the nRF52840 microcontroller, assembled with various sensing modules, carrying Bluetooth Low Energy wireless capability, which can be programmed by both Arduino and Python. It provides great convenience for the realization of Embedded AI and IoT, which can be your great learning tool.

Built around the nRF52840 processor for 64MHz operation, 256 KB SRAM, and 1MB flash, it runs on Arm® Mbed™ OS, offering embedded AI processing ability and Bluetooth wireless capability. Supported by Arduino official libraries and programmable by verified MicroPython via OpenMV IDE, this board brings a great development experience for you.

Additionally, this board integrates multiple sensing modules and chips, to implement motion detection through two IMUs, audio capturing and analyzation, digital proximity, and ambient light measurement, RGB colors, and gestures detection, 24-bit pressure data output between 260 to 1260 hPa, temperature and humidity detection within 0.2 °C accuracy.

Whether realizing embedded AI or the Internet of Things, whether learning fundamental Machine Learning theories or directly deploying for practical purposes, this development board for all developers' levels will help beginners get quickly started with electronics and help advancers implement delicate smart projects. Thanks to its tiny form factor, wearable devices' constitution can be easy and in.

Highlighted Features

  • AI-enabled Arduino Development Board: Build upon the nRF52840 microcontroller and runs on Arm® Mbed™ OS, competent for embedded ML
  • Bluetooth Wireless Capability: Equip a 2.4 GHz Bluetooth® 5 low-energy module, and assembled an internal antenna
  • All-in-one Sensing Functionality: Assemble multiple modules for the detection of motion, audio, proximity, gesture, barometric pressure, temperature, and humidity
  • Finger-size Board: Portable, suited for anywhere
  • Multiple Development Approaches: Python support, Lauterbach TRACE32 debugger support

Applications

  • Enable Embedded AI with Edge Impulse or Tensor Flow Lite
  • Wearable Devices
  • Movements Recognization
  • Room Temperature Monitoring and Controlling
  • Gesture or Voice Recognition Device

Specifications

 

Board

 

Name

 

Arduino® Nano 33 BLE Sense Rev2

 

Microcontroller

 

nRF52840

 

USB connector

 

Micro USB

 

Pins

 

Built-in LED Pin

 

13

 

Digital I/O Pins

 

14

 

Analog input pins

 

8

 

PWM pins

 

5

 

External interrupts

 

All digital pins

 

Connectivity

 

Bluetooth®

 

NINA-B306

 

Sensors

 

IMU

 

BMI270 (3-axis accelerometer + 3-axis gyroscope) + BMM150 (3-axis Magnetometer)

 

Microphone

 

MP34DT06JTR

 

Gesture, light, proximity

 

APDS9960

 

Barometric pressure

 

LPS22HB

 

Temperature, humidity

 

HS3003

 

Communication

 

UART

 

RX/TX

 

I2C

 

A4 (SDA), A5 (SCL)

 

SPI

 

D11 (COPI), D12 (CIPO), D13 (SCK). Use any GPIO for Chip Select (CS).

 

Power

 

I/O Voltage

 

3.3V

 

Input voltage (nominal)

 

5-18V

 

DC Current per I/O Pin

 

10 mA

 

Clock speed

 

Processor

 

nRF52840 64MHz

 

Memory

 

nRF52840

 

256 KB SRAM, 1MB flash

 

Dimensions

 

Weight

 

5gr

 

Width

 

18 mm

 

Length

 

45 mm

Documentation

Data Sheet